Regular Paper

July 1, 2024


Integrating Entropy-based Data Reduction and Machine Learning in Multidisciplinary Engineering Systems for Enhanced Response Prediction
Sungkun Hwang, Eun-Ho Lee, Seung-Kyum Choi
Int. J. Precis. Eng. Manuf.-Smart Tech.. 2024;2(2):79-92.

Regular Paper

July 1, 2024


A Digital Approach to via Edge Roughness Characterization and Quantification
Kuan Lu, Pengfei Lin, ChaBum Lee
Int. J. Precis. Eng. Manuf.-Smart Tech.. 2024;2(2):93-99.

Regular Paper

July 1, 2024


Development of Micro Electrical Discharge Machine and Micro-hole Machining Using Multiple Micro Electrodes
Min Chul Shin, Bo Hyun Kim, Gyu Man Kim
Int. J. Precis. Eng. Manuf.-Smart Tech.. 2024;2(2):101-108.

Regular Paper

July 1, 2024


Fuzzy Neural Network Control for a Reaction Force Compensation Linear Motor Motion Stage
Kyung Ho Yang, Hyeong-Joon Ahn
Int. J. Precis. Eng. Manuf.-Smart Tech.. 2024;2(2):109-114.

Regular Paper

July 1, 2024


Development of a Bowden-cable-based Exoskeleton Suit for Assisting Passive Stretching Exercises in Patients with Frozen Shoulder
Haneul Jeon, Taeho Kim, Donghun Lee
Int. J. Precis. Eng. Manuf.-Smart Tech.. 2024;2(2):115-121.

Regular Paper

July 1, 2024


Development of Situation Awareness Model in Robotic Spot-welding (RSW) System based on Sensor Data Visualization
Inwoong Noh, Jiho Lee, Sang Won Lee
Int. J. Precis. Eng. Manuf.-Smart Tech.. 2024;2(2):123-131.

Regular Paper

July 1, 2024


Enhancing Inductive IR Thermography by Using FFT-Equalization, Motion Tracking Detection and VDSR Super-resolution Processing
Seungju Lee, Yoonjae Chung, Wontae Kim
Int. J. Precis. Eng. Manuf.-Smart Tech.. 2024;2(2):133-142.

Review

July 1, 2024


OPC UA-based Force Control for Deep Rolling with Mechanical Tools
Berend Denkena, Henning Buhl, Jan Berlin, Oliver Maiß
Int. J. Precis. Eng. Manuf.-Smart Tech.. 2024;2(2):143-150.

Review

July 1, 2024


Advancements in Energy Harvesting: Piezoelectric, Triboelectric, Pyroelectric, and Magnetoelectric Technologies for Self-powered Sensor Systems
Biswajit Mahanty, Dong-Weon Lee
Int. J. Precis. Eng. Manuf.-Smart Tech.. 2024;2(2):151-167.

Industry Case Study

July 1, 2024


Measurement-based Dynamic Modelling in Levitated Active Magnetic Bearing Systems
Brett Wallace, Matthew Nesbitt, Jihyun Lee
Int. J. Precis. Eng. Manuf.-Smart Tech.. 2024;2(2):169-177.

Industry Case Study

July 1, 2024


Case Study of KIMM Universal Gripper: Analysis of Commercial Industrial Gripper and Evaluation of the KIMM Universal Gripper in Industry
Sung-Hyuk Song, Yong-Sin Seo, Jae-Young Lee, Min-jun Kim
Int. J. Precis. Eng. Manuf.-Smart Tech.. 2024;2(2):179-189.

Industry Case Study

July 1, 2024


Hybrid Model Based Autonomous System for Controlling Double Side Grinding Process
Hong-Seok Park, Ngoc-Hien Tran
Int. J. Precis. Eng. Manuf.-Smart Tech.. 2024;2(2):191-208.

Short Communication

July 1, 2024


Introduction of Human-in-the-Loop in Smart Manufacturing (H-SM)
Duck Bong Kim, Mahdi Sadeqi Bajestani, Ju Yeon Lee, Seung-Jun Shin, Sang Do Noh
Int. J. Precis. Eng. Manuf.-Smart Tech.. 2024;2(2):209-214.
MOST CITED
+ more
Key Enabling Technologies for Smart Factory in Automotive Industry: Status and Applications
Jongsuk Lee (Lee J), Ping Chong Chua (Chua PC), Lequn Chen (Chen L), Poh Huat Nicholas Ng (Ng PHN), Yerim Kim (Kim Y), Qiong Wu (Wu Q), Sumin Jeon (Jeon S), Jihwan Jung (Jung J), Siheon Chang (Chang S), Seung Ki Moon (Moon SK)
A Design Optimization Framework for 3D Printed Lattice Structures
Wesley R Jerin (Jerin WR), Seong Je Park (Park SJ), Seung Ki Moon (Moon SK)

MOST READ
+ more
Key Enabling Technologies for Smart Factory in Automotive Industry: Status and Applications
Jongsuk Lee (Lee J), Ping Chong Chua (Chua PC), Lequn Chen (Chen L), Poh Huat Nicholas Ng (Ng PHN), Yerim Kim (Kim Y), Qiong Wu (Wu Q), Sumin Jeon (Jeon S), Jihwan Jung (Jung J), Siheon Chang (Chang S), Seung Ki Moon (Moon SK)
Digital Twin Based Machining Condition Optimization for CNC Machining Center
Beomsik Sim (Sim B), Wonkyun Lee (Lee W)
Regular Papers
Integrating Entropy-based Data Reduction and Machine Learning in Multidisciplinary Engineering Systems for Enhanced Response Prediction
Sungkun Hwang, Eun-Ho Lee, Seung-Kyum Choi
Int. J. Precis. Eng. Manuf.-Smart Tech.. 2024;2(2):79-92.   Published online July 1, 2024
DOI: https://doi.org/10.57062/ijpem-st.2023.00136
                  
A Digital Approach to via Edge Roughness Characterization and Quantification
Kuan Lu, Pengfei Lin, ChaBum Lee
Int. J. Precis. Eng. Manuf.-Smart Tech.. 2024;2(2):93-99.   Published online July 1, 2024
DOI: https://doi.org/10.57062/ijpem-st.2024.00010
                  
Development of Micro Electrical Discharge Machine and Micro-hole Machining Using Multiple Micro Electrodes
Min Chul Shin, Bo Hyun Kim, Gyu Man Kim
Int. J. Precis. Eng. Manuf.-Smart Tech.. 2024;2(2):101-108.   Published online July 1, 2024
DOI: https://doi.org/10.57062/ijpem-st.2024.00031
                  
Fuzzy Neural Network Control for a Reaction Force Compensation Linear Motor Motion Stage
Kyung Ho Yang, Hyeong-Joon Ahn
Int. J. Precis. Eng. Manuf.-Smart Tech.. 2024;2(2):109-114.   Published online July 1, 2024
DOI: https://doi.org/10.57062/ijpem-st.2024.00038
                  
Development of a Bowden-cable-based Exoskeleton Suit for Assisting Passive Stretching Exercises in Patients with Frozen Shoulder
Haneul Jeon, Taeho Kim, Donghun Lee
Int. J. Precis. Eng. Manuf.-Smart Tech.. 2024;2(2):115-121.   Published online July 1, 2024
DOI: https://doi.org/10.57062/ijpem-st.2024.00045
                  
Development of Situation Awareness Model in Robotic Spot-welding (RSW) System based on Sensor Data Visualization
Inwoong Noh, Jiho Lee, Sang Won Lee
Int. J. Precis. Eng. Manuf.-Smart Tech.. 2024;2(2):123-131.   Published online July 1, 2024
DOI: https://doi.org/10.57062/ijpem-st.2024.00101
                  
Enhancing Inductive IR Thermography by Using FFT-Equalization, Motion Tracking Detection and VDSR Super-resolution Processing
Seungju Lee, Yoonjae Chung, Wontae Kim
Int. J. Precis. Eng. Manuf.-Smart Tech.. 2024;2(2):133-142.   Published online July 1, 2024
DOI: https://doi.org/10.57062/ijpem-st.2024.00108
                  
Reviews
OPC UA-based Force Control for Deep Rolling with Mechanical Tools
Berend Denkena, Henning Buhl, Jan Berlin, Oliver Maiß
Int. J. Precis. Eng. Manuf.-Smart Tech.. 2024;2(2):143-150.   Published online July 1, 2024
DOI: https://doi.org/10.57062/ijpem-st.2024.00073
                  
Advancements in Energy Harvesting: Piezoelectric, Triboelectric, Pyroelectric, and Magnetoelectric Technologies for Self-powered Sensor Systems
Biswajit Mahanty, Dong-Weon Lee
Int. J. Precis. Eng. Manuf.-Smart Tech.. 2024;2(2):151-167.   Published online July 1, 2024
DOI: https://doi.org/10.57062/ijpem-st.2024.00080
                  
Industry Case Studys
Measurement-based Dynamic Modelling in Levitated Active Magnetic Bearing Systems
Brett Wallace, Matthew Nesbitt, Jihyun Lee
Int. J. Precis. Eng. Manuf.-Smart Tech.. 2024;2(2):169-177.   Published online July 1, 2024
DOI: https://doi.org/10.57062/ijpem-st.2023.00143
                  
Case Study of KIMM Universal Gripper: Analysis of Commercial Industrial Gripper and Evaluation of the KIMM Universal Gripper in Industry
Sung-Hyuk Song, Yong-Sin Seo, Jae-Young Lee, Min-jun Kim
Int. J. Precis. Eng. Manuf.-Smart Tech.. 2024;2(2):179-189.   Published online July 1, 2024
DOI: https://doi.org/10.57062/ijpem-st.2024.00087
                  
Hybrid Model Based Autonomous System for Controlling Double Side Grinding Process
Hong-Seok Park, Ngoc-Hien Tran
Int. J. Precis. Eng. Manuf.-Smart Tech.. 2024;2(2):191-208.   Published online July 1, 2024
DOI: https://doi.org/10.57062/ijpem-st.2024.00094
                  
Short Communication
Introduction of Human-in-the-Loop in Smart Manufacturing (H-SM)
Duck Bong Kim, Mahdi Sadeqi Bajestani, Ju Yeon Lee, Seung-Jun Shin, Sang Do Noh
Int. J. Precis. Eng. Manuf.-Smart Tech.. 2024;2(2):209-214.   Published online July 1, 2024
DOI: https://doi.org/10.57062/ijpem-st.2024.00115
                  
Volume2 No. 2
Journal Cover1 Journal Cover2
Editorial Office
12F, SKY1004 bldg., 50-1, Jungnim-ro, Jung-gu, Seoul 04508, Republic of Korea
TEL : +82-2-518-2928   E-mail : ijpem.st@kspe.or.kr
Developed in M2PI
Copyright © Korean Society for Precision Engineering.
Close layer
prev next